Bevel angle

The bevel angle function can be used to define bevels in an NC model and attach them to machining operations.

Define bevels

  1. Under Manufacturer > Machine-specific functions > Bevel angle, click the Bevel angle button.
  • All NC elements are highlighted in colour.
  1. Select an NC element with the left mouse button.
  • The selected element is highlighted in colour.
  • The Bevel parameters dialogue box opens. See also: .
  1. Configure your desired settings.
  1. Click OK.
  • If you want to apply the same bevel to other NC elements, continue with the next step. Otherwise, continue with step 7.
  1. Select a function for element selection.
  1. Select NC elements accordingly.
  1. Click on Close.
  1. If you want to define further bevels, repeat steps 2 to 4.
  1. Click on Close.
  • The bevels are applied and the function is closed.
Additional information
Also see about this