General parameters tab

Set default parameters

After clicking the button, default values are set for all parameters.

Tool

Tool diameter

Here, the tool diameter, which was predefined depending on the current machine and the selected material, is displayed.

Allowance

Here, you can enter the value that is added or subtracted as an allowance for the contour. The function is only available if the traverse path is calculated equidistantly without path correction.

Path correction and direction

Activate path correction

Here, the output is activated with path correction. Path correction ensures that the machine automatically displaces the transmitted tool path by the radius of the tool.

NOTICE

Incorrect traverse path

Path correction may only be activated if the traverse path is calculated centrally.

Path outward in a clockwise direction

Here, the machining direction of the outer contour is activated in a clockwise direction.

Path inward in a clockwise direction

Here, the machining direction of the inner contours is activated in a clockwise direction.

Travel path (traverse)

Equidistant

This option calculates the tool path offset by the radius of the tool.

NOTICE

Incorrect traverse path

The traverse path may only be calculated equidistantly if path correction is deactivated.

Contour centre

With this option, the tool path is calculated exactly on the contour.

NOTICE

Contour damage

The traverse path may only be calculated centrally if path correction is activated.

Macros

Search macros

Here, you can activate a search for macros based on the current geometry in order to insert these.

Vaporising parameters

Vaporise foil

Here, the vaporising of foiled material before processing is activated.

Minimum part size in X

Here, the minimum dimension of the parts in the X direction is entered, from which the vaporising is set.

Minimum part size in Y

Here, the minimum dimension of the parts in the Y direction is entered, from which the vaporising is set.

Maximum part size in X

Here, the maximum dimension of the parts in the X direction is entered, up to which the vaporising is set.

Maximum part size in Y

Here, the maximum dimension of the parts in the Y direction is entered, up to which the vaporising is set.

Vaporising method 1

With this option, all elements that have been allocated for laser machining are vaporised.

Vaporising method 2

Here, only the piercing hole and the lead-in path are vaporised.

Ignition hole

Safety distance

Here, the minimum distance from the piercing point to the contour is entered.

Burn ignition hole

Ignition holes are burnt with this option.

Pre-punch ignition hole

Ignition holes are punched with this option.

Parameters for pre-punching

Pre-punched hole diameter

Here, the diameter of the pre-punched hole is entered.

Distance between the lead-in path and the edge of the pre-punched hole

Here, the distance of the lead-in path to the edge of the pre-punched hole is entered.

Allowance for collision check during pre-punching

Here, the allowance for the collision check during pre-punching is entered.

Pre-punched hole with open contours

Pre-punching for open contours is activated here.