Corner parameters tab
Corner machining
Rounded corner
This option automatically rounds corners.
Rounded corner radius outside
The rounded corner radius for outside corners is entered here.
Rounded corner radius inside
The rounded corner radius for inside corners is entered here.
Generate from angle change
Here, the angle change between two elements is entered, from which a rounded corner is to be generated.
Loop
With this option, a loop is added to the tool path at outer corners of the contour outline.
Maximum contour overcut
Here, the maximum distance is entered by which the loop may exceed the contour.
... relative to thickness
After activating the checkbox, the entered value is multiplied by the sheet thickness.
Generate from angle change
The angle change between two elements from which a loop is to be generated is entered here.
Triangle
This option adds a triangle to the tool path at the outer corners of the contour.
Maximum contour overcut
How far the triangle (tool diameter included) should project beyond the contour is entered here.
... relative to thickness
After activating the checkbox, the entered value is multiplied by the sheet thickness.
Generate from angle change
The angle change between two elements from which a triangle is to be generated is entered here.
Parameters for standard corner
Protrusion factor
The protrusion factor is a calculation basis for bypassing pointed outer corners if the tool path has been calculated equidistantly. This value does not normally need to be changed.
