Internal contour tab
Lead-in path
Contour without microjoint
Cutting path type at outer corner
For closed inner contours without a microjoint, you can select here whether a lead-in path should be cut at an outer corner. If a lead-in path is to be cut, the shape of the lead-in path is selected.
Cutting path type at element centre
For closed inner contours without a microjoint, you can select here whether a lead-in path should be cut at the centre of the element. If a lead-in path is to be cut, the shape of the lead-in path is selected.
Macro name
Here, the macro for the lead-in path is selected, if macro is selected as the cutting path type. Alternatively, the macro can be selected graphically via the .. button.
Contour with microjoint
Cutting path type at outer corner
Here, you select the lead-in path shape that is to be cut at an outer corner.
Cutting path type at element centre
Here, you select the lead-in path shape to be cut at the centre of an element.
Macro name
Here, the macro name for the lead-in path is selected as macro.
Lead-in path parameters
Length
The length of the lead-in path is entered here.
Radius
The radius of the lead-in path is entered here.
Opening angle
The opening angle of the lead-in path is entered here.
Lead cut position
The position at which the lead-in is to be made is selected here. The following options can be selected:
Optimal position
The program automatically calculates the optimum position and places the lead-in there.
Preferably on outside corner
The lead-in is placed at an outer corner, if possible.
Preferably at the centre of the element
The lead-in is placed at the centre of an element, if possible.
Lead-out path
Contour without microjoint
Cutting path type at outer corner
Here, you select the lead-in path shape that is to be cut at an outer corner.
Cutting path type at element centre
Here, you select the lead-in path shape to be cut at the centre of an element.
Macro name
Here, the macro name for the lead-in path is selected as macro.
Contour with microjoint
Cutting path type at outer corner
Here, you select the lead-in path shape that is to be cut at an outer corner.
Cutting path type at element centre
Here, you select the lead-in path shape to be cut at the centre of an element.
Macro name
Here, the macro name for the lead-in path is selected as macro.
Lead-out parameters
Length
The length of the lead-in path is entered here.
Radius
The radius of the lead-in path is entered here.
Opening angle
The opening angle of the lead-in path is entered here.
Overrun
Overrun contour
After activating the check box, the contour is overrun.
Overrun length
The overrun length is entered here.
