General parameters tab
Combi common cut strategy
Sort inner contours
Here, you can select how the inner contours are to be sorted: Per part, per group or per sheet.
Sort islands
Here, you can select how the islands should be sorted: Per part, per group or per sheet.
Punch islands
Here, you select which islands are to be punched: Never, rectangular contours, right-angled contours or all contours.
Junctions
Cutouts
Here, you can select whether the junctions should be cut out.
Cutout length
The cutout length is entered here.
Overlap
The overlap is entered here.
Junctions with approach path
Here, you can select whether junctions with an approach path are to be generated.
Approach path
The approach path is entered here.
Lasering parameters
Burn ignition hole
Ignition holes are burnt with this option.
Punch ignition hole
Ignition holes are punched with this option.
Lead-in path
The setting of a lead-in path can be activated here.
Length of the lead-in path
The length of the lead-in path is entered here.
Vaporise foil
Here, you can activate the Vaporise foil function.
Combine aligned laser machining
Here, you can activate the Combine aligned laser machining function.
Delete laser machining outside the sheet
Here, you can activate the deletion of laser machining outside the sheet.
Trimming
Edge trimming
Here, you can select whether the edge should be trimmed with the laser, by punching or not at all.
Maximum width for trimming
The maximum width for trimming is entered here.
Trimming tool
Dimension in X
The dimension in the X direction is entered here.
Dimension in Y
The dimension in the Y direction is entered here.
Dimension in D
The diameter is entered here.
Destruction tool
Dimension in X
The dimension in the X direction is entered here.
Dimension in Y
The dimension in the Y direction is entered here.
Dimension in D
The diameter is entered here.
Distances
Cutting kerf
The value for the cutting kerf is entered here.
Nesting distance
The nesting distance is entered here.
Cut contours
Cut outer contour in clockwise direction
Here, you can select whether the outer contour should be cut clockwise.
Cut outer contour counter-clockwise
Here, you can select whether the outer contour is to be cut counter-clockwise.
