Part data tab
Part
Article
The designation of the current part is displayed here and can be changed.
Archive number
The number of the archive in which the part is stored is displayed and can be changed here.
Number of parts min / max
The minimum or maximum number of parts to be produced is entered here.
Machine
Here, the number of the machine on which the part is to be manufactured is entered or can be selected via the button..
Material
The number of the material from which the part is to be manufactured is entered here or can be selected via the button..
Thickness
Here, the thickness of the material is entered or can be selected via the button..
Parameters
Mirroring allowed
The release for mirroring the part is given here.
Number of increments (1-360)
Here, you enter the number of steps into which a complete rotation of the part is to be broken down. This results in the permissible angle of rotation for the part.
Pre-rotation angle
The angle by which the part is to be rotated before it is used for nesting is specified here.
Part is suitable for common cut
This indicates whether the part is suitable for the use of common separation cuts.
Production status
Released
Here, you can see how many parts of the order are already released for production.
Scrap
The number of scrap parts is displayed here.
Finished
The number of parts recorded as finished is displayed here.
Cleared
The number of parts that have been cleared is displayed here.
Status
Reservation
If the order is currently being used by another user for nesting, their User ID is displayed here.
Production release
The release for production is activated here. The order is then released for production.
Program existence
This confirms that a program for the order already exists in the archive.
Geometry
Display of the current part with dimensions.
Part info
Deadline
The planned date by which the order must be completed is displayed here and can be changed.
Order
The designation of the order of the current part is entered here.
Position
An item description for the part is entered here.
Comment
A comment can be entered here.
Priority
The priority of the job from 1 (high) to 9 (low) is entered here.
Commission
A commission number for the part is entered here.
Colour
Here, you can specify the colour in which the part is to be displayed. However, if forexample, you assign commission numbers, then the part colour is automatically set to distinguish the parts for the commissions.
Assembly
The name of the assembly is displayed here if the order was created by adding an assembly to the order pool.
Standard nesting
Name
The name of the standard nesting for this item is entered here.
Archive number
The number of the archive in which the standard nesting is stored is entered here.
