Remnant sheet parameter dialogue box
Remnant sheet management
Contour path as remaining sheet
With this option, a contour path can be selected, which is then created as a remnant sheet.
Remnant sheet name
The name for the remnant sheet is entered here. The following placeholders are possible:
Placeholder | Meaning |
|---|---|
$XDIM | X dimension |
$YDIM | Y dimension |
$ORIG | Original name of the sheet |
$ORIG+xx | Original name of the sheet with defined characters (maximum 20) |
$SN+xx | Sequential number of the remnant sheet(s) with defined characters (maximum 10) |
$LEGxx | NC legend line. e.g.: $LEG01 --> 1. NC legend line |
$JOBNO | Sheet job number |
$MAT | Material designation |
$THIC | Material thickness |
Current geometry as remaining sheet
This option creates the current geometry as a remnant sheet.
Remnant sheet name
See details above.
Current geometry with separation cut
With this option, either a separation cut is defined automatically based on the current geometry or a separation cut can be defined manually to create a remnant sheet.
Remnant sheet name
See details above.
Inner closed contours as remnant sheets
Here you activate that inner closed contours are created as remnant sheets.
Remnant sheet name
See details above.
Min contour dim. X
Here you enter the minimum length in the X direction from which a contour can be created as a remnant sheet.
Min contour dim. Y
Here you enter the minimum length in the Y direction from which a contour can be created as a remnant sheet.
Display remnant sheet parameters
Here you activate that remnant sheet parameters are displayed.
