Auto separation cut parameters dialogue box
Tool
Tool diameter
The tool diameter is entered here.
Ignition hole
Safety distance
Here, you enter the minimum distance that the piercing point of the lead-in path must have to the parts in order to create a separation cut.
Burn ignition hole
The ignition hole is burnt with this option.
Punch ignition hole
The ignition hole is punched with this option.
Punch diameter
The diameter of the punching tool is entered here.
Lead-in path parameters
Generate lead-in path
This activates that a lead-in path is generated.
Difference angle of lead-in path
Enter the angle of the lead-in path to the separation cut here.
Length of lead-in path
The length of the lead-in path is entered here.
Traverse path
From bottom to top
With this option, the separation cuts are made from bottom to top.
From top to bottom
With this option, the separation cuts are made from top to bottom.
Meandering
With this option, the separation cuts are started alternately from the top and bottom.
Insertion position
Program start
This option inserts the separation cuts at the beginning of the program.
End of program
This option inserts the separation cuts at the end of the program.
Before separation cut
This option inserts the entire separation cut before the parts that touch the cut.
After separating cut
This option inserts the entire separation cut after the parts that touch the cut.
Assign to each part
With this option, the individual separation cuts are inserted before each part that they meet.
Parameters for separation cuts
Separation spacing in X
The spacing of the separation cuts in the X direction is entered here.
Separation offset
Here, you enter the dimension by which the spacing between the separating cuts is to increase or decrease with each separation cut.
Edge overhang beginning / end
Here, you enter the dimension by which the cut is extended at the beginning or end.
Distance from the contour
Here, you enter the distance that the beginning and the end of the individual separation cuts should have from the parts.
Min. cutting length
Here, you enter the minimum length that the separation line must have in order to generate a separation cut.
Single separation cut
This activates that only the first possible separation cut is generated.
At the sheet edge without lead-in path
This activates that a separation cut is generated at the edge of the sheet without a lead-in path.
Turn around at the edge of the sheet
from the outside in
With this option, the separation cut is made at the edge of the sheet from the outside to the inside.
from the inside out
With this option, the separation cut is made at the edge of the sheet from the inside to the outside.
