Separation cut parameters dialogue box
Insert at the beginning of the program
This option inserts the separation cut at the beginning of the program.
Insert at end of program
This option inserts the separation cut at the end of the program.
Laser diameter
The laser diameter is entered here.
Burn starting hole
The ignition hole is burnt with this option.
Punch starting hole
The ignition hole is punched with this option.
Punching tool diameter
The diameter of the punching tool is entered here.
Generate lead-in path
Here, you select whether a lead-in path should be generated or not.
Difference angle of lead-in path
Enter the angle of the lead-in path to the separation cut here.
Length of lead-in path
The length of the lead-in path is entered here.
Safety distance
Here, you enter the minimum distance that the piercing point of the lead-in path must have to the parts in order to create a separation cut.
Distance from parts
Here, you enter the distance that the separation cut should have to the parts.
Edge overhang beginning / end
Here, you enter the dimension by which the cut is extended at the beginning or end.
Minimum remnant strip length
Here, you enter the minimum dimension in the Y direction that a remnant strip must have in order for a separation cut to be created.
Travel from left to right
This option performs the cut from left to right.
Travel from right to left
This option performs the cut from right to left.
