Auto separation cut parameters dialogue box
Strategy
Test strategy type1 - largest area
This option divides the remaining area into rectangles with the largest possible area.
Test strategy type 2 - longest side
This option divides the remaining area into rectangles with sides as long as possible.
Separation parameters
Separation grid in X / Y
The grid spacing in the X or Y direction in which the separating cuts can be positioned is entered here.
Safety distance to parts
The minimum distance that the individual separating cuts should have to the parts is entered here.
First side - min dimension
Second side - min dimension
Up to thickness (mm)
Max remnant sheet weight (kg)
The maximum weight that a remnant sheet may have is entered here.
Residual area
Display remnant surface
Here the display of the remnant surface is activated.
automatic lift removal
mark with INSERT set
allowance for rectangular area
Remnant sheet
Create remnant sheet in material pool
Here you activate that the created rectangles are created as remnant sheets in the material pool.
Remnant sheet name
This is where the naming of the remnant sheets is defined.
Lasering parameters
Laser diameter
The diameter of the laser beam is entered here.
Burn starting hole
The ignition hole is burnt with this option.
Punch starting hole
The ignition hole is punched with this option.
Punching tool diameter
The diameter of the punching tool is entered here.
Generate lead-in path
This activates that a lead-in path is generated.
Difference angle of lead-in path
Enter the angle of the lead-in path to the separation cut here.
Length of lead-in path
The length of the lead-in path is entered here.
Safety distance
Here, you enter the minimum distance that the piercing point of the lead-in path must have to the parts in order to create a separation cut.
Sorting/traverse path
Insert at the beginning of the program
This option inserts the separation cuts at the beginning of the program.
Insert at the end of the program
This option inserts the separation cuts at the end of the program.
Travel from bottom to top
With this option, the separation cuts are made from bottom to top.
Travel from top to bottom
With this option, the separation cuts are made from top to bottom.
