1. PN4000 online help
2. Nesting
3. Separation Cuts
4. Punching
5. Common cut punching
6. Common cut punching parameters dialogue box
7. Extended parameters tab

Extended parameters tab

Type 1 disposal / Type 2 disposal

Traverse path

Here, you select at which point of the part the disposal should take place and from which direction the last machining should take place before the disposal.

Maximum size in X direction

Here, you specify up to which maximum dimension in the X direction a part is to be disposed of with the disposal.

Maximum size in Y direction

Here, you specify up to which maximum dimension in the Y direction a part is to be disposed of with the disposal.

Manual disposal

Traverse path

Here, you select at which point of the part the disposal should take place and from which direction the last machining should take place before the disposal.

Lift disposal

Traverse path

Here, you select at which point of the part the disposal should take place and from which direction the last machining should take place before the disposal.

Lug parameters

Lug width

The lug width is entered here.

Minimum length

The minimum length for the lug is entered here.

Minimum number of lugs per side

The minimum number of lugs per side is entered here.

Maximum number of lugs per side

The maximum number of lugs per side is entered here.

Set lugs on left side of part

This activates that the lugs are generated on the left side of the part.

Set lugs on right side of part

This activates that the lugs are generated on the right side of the part.

Set lugs at top of part

This activates that the lugs are generated on the top of the part.

Set lugs at bottom of part

This activates that the lugs are generated at the bottom of the part.