1. PN4000 online help
2. Nesting
3. Separation Cuts
4. Punching
5. Line horizontal
6. Separation cut parameters dialogue box

Separation cut parameters dialogue box

Insert at the beginning of the program

This option inserts the separation cut at the beginning of the program.

Insert at end of program

This option inserts the separation cut at the end of the program.

Cutting tool parameters

X dimension

The dimension of the cutting tool in the X direction is entered here.

Y dimension

The dimension of the cutting tool in the Y direction is entered here.

Diameter

The diameter of the cutting tool is entered here.

Distance from parts

Here, you enter the distance that the separation cut should have to the parts.

Protrusion at left sheet edge

Here you enter the dimension by which the separation cut is extended at the left edge of the sheet.

Protrusion at right sheet edge

Here you enter the dimension by which the separation cut is extended at the right edge of the sheet.

Minimum remnant strip length

Here, you enter the minimum dimension in the Y direction that a remnant strip must have in order for a separation cut to be created.

Stop at separation cut end

Here you select whether a stop is set after the separation cut or not.

Travel from left to right

This option performs the cut from left to right.

Travel from right to left

This option performs the cut from right to left.