Trim NC-CAD

The NC-CAD trim function extends or shortens a selected NC element to the intersection point with a selected CAD element.

Trim NC element to CAD element

  1. Under Lasering > Change > Correction, click the NC-CAD trim button.
  • All NC elements are highlighted in colour.
  1. Select the NC element that is to be shortened or lengthened.
  • The element is highlighted in colour.
  1. Select the CAD element that is to serve as the target for the shortening or lengthening.
  • The selected NC element is shortened or lengthened if both elements have a common intersection point.
  1. If you want to discard the result, click Undo.
  1. If you want to trim more NC elements, repeat steps 2 and 3.
  1. Click Close.
  • The function is ended.