General parameters tab
Tool
Laser diameter
The predefined tool diameter is displayed here and can be changed. The definition depends on the current machine and the selected material.
Allowance
Here, you can enter the value that is added or subtracted as an allowance for the contour.
An allowance may only be specified if the traverse path is calculated equidistantly without path correction.
Ignition hole
Burn ignition hole
Ignition holes are burnt with the laser in this option.
Punch ignition hole
With this option, a hole is punched beforehand at the ignition points of the laser (pre-punch hole).
Safety distance
The minimum distance from the piercing point to the contour of the part is entered here.
Punched hole diameter
Here, the diameter of the pre-punched hole is entered.
Buttons
Set default parameters
The predefined default values are set for all parameters.
