Element cut

The Element cut function adds further contour elements to a T-constellation to generate a continuous contour that can be machined.

Element cut (A: before, B: after)

1

Line 1: The element cut is executed parallel to this line.

2

Line 2: This line is cut through the element cut.

3

Distance of the element cut

Generate element cut

  1. Under CAD > Change > Round bevel, click the Element cut button.
  1. Enter the distance of the element cut.
  1. Select the line along which you want the element to be cut.
  1. Click on the following line at the point where the element cut is to be generated.
  • The element cut is generated.