Rectangle hole tab

Hole type

In this tab, the hole type for rectangular holes is selected and the settings for the selected hole type are made.

Here, you can select the hole type for a rectangular hole in straight rows.

Hole length (l)

The hole length is entered here.

Hole width (w)

The hole width is entered here.

Longitudinal length (c2)

Here, you enter the longitudinal length for the rectangular hole. The longitudinal length is the length in the X direction.

Lateral length (c1)

Here, you enter the lateral length for the rectangular hole. The lateral length is the length in the Y direction.

Angle

The angle for the rectangular hole is selected here. You can select 0 or 90 degrees.

Edge distance

The edge distance is entered here.

Position in X/Y

This function is activated if the edge distances in X and Y are to be entered manually.

Centring

This function is activated if the edge distances should be equal.

The hole pattern is centred.

Edge distance X

Here, the edge distance in X is entered. Only a negative margin distance or 0 can be entered. Positive values are not possible.

Edge distance Y

Here, you enter the edge distance in Y. Only a negative margin distance or 0 can be entered. Positive values are not possible.