1. PN4000 Online Help
2. Manufacturer
3. Machine-specific Functions
4. Cutting Strategies
5. Weld seam auto (laser)
6. Parameters for a cut over a weld seam dialogue box

Parameters for a cut over a weld seam dialogue box

Piercing type

Here, you enter the type of piercing for the newly generated machining operations.

Weld seam

Contour type

The type of contour used in the area of the weld seam is entered here.

Weld seam width

The width of the area around the weld seam is entered here.

Weld seam width for engraving

The width of the area around the weld seam to be excluded from an engraving is entered here.

Engraving on a weld seam is not possible. Therefore, if the weld seam intersects the area of an engraving, no engraving will be made in the specified area. The area is only passed over.

Automatic search active

Here, the automatic search of the weld seam by colour is activated.

Colour

Here, you enter the number of the colour that is used for the automatic search of the weld seam.

Material 1 or 2

Contour type small contour

Here, you specify for the respective material which type of contour is used for small contours.

Contour type large contour

Here, you specify for the respective material which type of contour is used for large contours.

Contour type engraving

Here, you specify for the respective material which type of contour is used for engraving.

Overlap

Here, you specify for the respective material how much overlap the different processing steps should have before, on and after the weld seam.

Sorting

Sort source according to material