1. PN4000 online help
2. Milling
3. Manual
4. Nibble contour
5. Contour machining parameters dialogue box
6. Lead-out tab

Lead-out tab

Lead-out type

Macro for lead-out

Here, you enter the name of the macro to be used for the lead-out path.

Lead-out macro definition

With this option, the specified macro is used for the lead-out path.

Arc

This option generates the path in the form of an arc.

Straight

This option generates the path in the form of a straight line.

No

With this option, no path is generated.

Closed contour parameters

Lead-out length line / macro

The length for the line or for the macro of the lead-out path is entered here.

This value depends on material and material thickness and is defined in the file TECHNO__TABLE.TXT (Table % 54 DEFINITION LENGTH LEAD-IN-LEAD-OUT TAB) in the directory u/pn/machine/machine_xxxx/config for the respective machine.

Lead-out radius arc

The radius of the arc is entered here.

Lead-out start angle

Here, you enter the angle to the centre of the arc in which the arc should start.

Lead-out end angle

Here, you enter the angle to the centre of the arc in which the arc should end.

Open contour parameters

See specifications for closed contours.