Popup Z contour processing dialogue box
1 | Offset centred Y |
2 | Offset centred X |
3 | Diameter for machining |
Tool parameters
Diameter
The diameter that is used on the tool for machining the contour is entered here.
Peak-to-valley depth
The peak-to-valley depth to be achieved is entered here.
Offset centred X
The distance from the centre of the machining diameter perpendicular to the centre of the tool is entered here.
Offset centred Y
The distance from the centre of the machining diameter vertical to the lower edge of the tool is entered here.
Path parameters
Start extension
Here, you enter how far the machining on the entry side should extend beyond the source element. This distance should be at least half the tool diameter.
End extension
Here, you enter how far the machining on the exit side should extend beyond the source element. This distance should be at least half the tool diameter.
Method
Line
With this option, a line is provided as the source element for the Z contour.
Arc
With this option, an arc is provided as the source element for the Z contour.
Contour
With this option, a free contour is provided as the source element for the Z contour.
