Extended parameters tab

Preferred application

Depending on the selected tool type, various parameters can be set here.

Preferred separation tool

This option marks the tool as the preferred separation tool.

Preferred nibbling tool for inner radii from diameter (mm)

This option marks the tool as the preferred nibbling tool for inner radii from the specified diameter.

Preferred nibbling tool for outer radii from diameter (mm)

This option marks the tool as the preferred nibbling tool for outer radii from the specified diameter.

Preferred destruction tool

This option marks the tool as the preferred destruction tool.

Stroke type for forming with active die

The stroke type for forming with active die is entered here.

Correction final depth

The correction of the final depth is entered here.

Correction minimum depth

The correction of the minimum depth is entered here.

Dead zone diameter (mm)

The diameter of the dead zone is entered here.

Check dead zone

Here the check is activated whether the specified dead zone collides with the protected zone of a forming.

Locked for repo

Here you activate that the tool is not available for repositioning.

PU scraper

Die lubrication [spot lubrication]

Permitted angular position for multi-stroke tool

The angular position that is allowed for the multiple tool is entered here.

Time per stroke (sec)

Here, you enter how long a stroke lasts for this tool.

Time for tool change (sec)

Here, you enter how long the tool change takes for this tool.