Separation cut parameters dialogue box
Separation angle
Here, you enter the angle at which the separation cut is to be positioned.
Separation angle increment
Here, you enter the angle at which the separation cut can be rotated incrementally.
Insert at the beginning of the program
This option inserts the separation cut at the beginning of the program.
Insert at end of program
This option inserts the separation cut at the end of the program.
Insert before contour
With this option, the separation cut is inserted before the contour it meets.
Insert after contour
With this option, the separation cut is inserted after the contour it meets.
Laser diameter
The laser diameter is entered here.
Burn starting hole
The ignition hole is burnt with this option.
Punch starting hole
The ignition hole is punched with this option.
Punching tool diameter
The diameter of the punching tool is entered here.
Generate lead-in path
Here, you select whether a lead-in path should be generated or not.
Difference angle of lead-in path
Enter the angle of the lead-in path to the separation cut here.
Length of lead-in path
The length of the lead-in path is entered here.
Safety distance
Here, you enter the minimum distance that the piercing point of the lead-in path must have to the parts in order to create a separation cut.
Distance from the contour
Here, you enter the distance that the separation cut should have to the parts.
